- Record the opening cash balance from bank records, with its source.
- Set the minimum balance before you look at the purchase.
- Enter the full cash cost in the quarter when the money leaves the account.
- Check the lowest balance in the quarter against the floor, not just the ending balance.
Set three cash budget figures before buying equipment: your opening cash balance, your minimum cash balance, and the purchase amount with the quarter it is paid.
Key takeaways
Why the purchase is really a cash question
A new tool, van, or copier feels like a decision about the machine. Most of the time it is really a decision about cash. The price shows up on one invoice, but the money has to be in the bank on the day it is due, and the business keeps spending on everything else while the new asset is being paid for. An owner can look at a monthly payment, decide it is affordable, and still end up short in the middle of the quarter because payroll, supplier bills, and tax payments all land in the same weeks.
A quarterly cash budget shows this problem before you sign anything. It lays out the cash you expect to start with, the cash you expect to receive, the cash you expect to pay out, and where the balance lands at the end of each quarter. A managerial accounting text on preparing financial budgets walks through how these parts fit together, and the pieces it covers are the same ones a small shop needs to track.
The three figures are your opening cash balance, your minimum cash balance, and the purchase amount together with the quarter in which it is paid. Each answers a simple question. How much cash do we really have to start? How low can the balance go before we are in trouble? When exactly will the money leave?
The opening cash balance
The opening balance is where the quarter begins. It sounds obvious, but it is the number most often guessed at. Many owners use the balance they remember, the balance from the last statement they glanced at, or the balance they hope to have after a big customer pays. A budget built on any of those numbers can look healthy on paper and still fail in practice.
Use the actual cash balance at the start of the quarter. Pull it from the bank statements or the accounting system, and check it against cleared transactions, not just deposits and written checks. Uncleared checks, pending card payments, and deposits that have not yet posted are all reasons the number in your head can be wrong. If you have more than one account, add them up and write down which accounts are included, so the figure means the same thing next quarter.
A textbook example shows why this matters. Its beginning cash balance is stated plainly as $13,000, and every later line in the budget is added to or subtracted from that starting figure. An error at the start carries through the whole quarter.
Write the opening balance at the top of a clean sheet and label where it came from. A short note such as "bank balance on the first day of the quarter, operating account only" is enough. Months later, when someone asks why the numbers do not match, the note will save an argument.
It also helps to separate cash you already owe from cash you can truly spend. If a supplier invoice from last quarter is still open, or a lease payment is already scheduled, those amounts are not available for the new purchase. You do not need to subtract them from the opening balance, but you should carry them as outflows so they are visible. The opening balance tells you what you have. The outflows tell you what is already spoken for.
The minimum cash balance you will not go below
The second figure is a floor. It is the lowest cash balance you are willing to accept at the end of any month or quarter, and you set it before you look at the purchase. Once a new machine is on the table, it is easy to rationalize running the account down to nearly nothing. A floor written down in advance protects you from that reasoning.
Some businesses already have a formal minimum, often set by a lender or by the owner's own rule. Others have never written one down. If you are in the second group, pick a number that would let you make payroll, cover the next round of supplier bills, and absorb one slow week of collections without panic. Keep the number where you will see it every time you update the budget.
A textbook example pairs a minimum cash balance requirement of $10,000 with a line of credit at an interest rate of 19%. The two facts belong together. The minimum tells you when you need more cash, and the line of credit tells you where that cash can come from and what it costs to borrow.
When you test the purchase against the floor, look at the lowest point in the quarter, not only the ending balance. Cash often dips in the middle of a period because large payments land early and collections arrive late. A quarter that ends comfortably can still have a week in which the balance crosses your floor. If your records are lumpy, build the budget on a weekly or monthly view so the low point is visible.
If the purchase pushes the balance below the floor, you have three honest choices. You can delay the purchase to a later quarter, reduce its cost or scope, or finance part of it in a way that keeps the balance above the floor. Each choice has a price. Delay means the machine does its work later. A smaller scope may mean giving up capacity you expected. Financing means interest and a payment obligation that continues after the quarter ends. The budget does not make the choice for you. It makes the trade-off visible before you commit.
The purchase amount and the quarter it is paid
The third figure feels most like the purchase itself: the amount, and the quarter in which the money leaves the account. Write both down. The amount should be the full cash cost you expect to pay, including the parts that are easy to forget, such as delivery, installation, the first set of supplies, and any required service visit. The quarter should be the one in which the cash actually goes out, which is not always the quarter in which the equipment arrives or the invoice is dated.
A purchase appears as a cash line only in the period when it is paid. This is one of the most common sources of confusion. A machine delivered in the last week of one quarter but paid for in the first week of the next belongs to the next quarter's cash budget. An owner who books it in the wrong quarter will see a healthy balance at the end of the first quarter and a shock at the start of the second.
A textbook example lays this out simply. The business plans to issue $5,000 of additional capital stock in the first quarter, pay taxes of $1,000 each quarter, and buy a copier for $8,500 in cash in the third quarter. The copier sits in one quarter, while the taxes repeat. Recurring costs and one-time purchases belong on the same sheet, but they behave differently. Recurring costs keep draining the account. The one-time purchase drains it once, and then the question becomes whether the machine brings in enough to replace the cash it took.
If you plan to pay in installments, treat each installment as its own line in the quarter it is due. Do not spread the total across the quarter as an average, because an average hides the timing, and timing is exactly what this exercise is meant to reveal. If the first installment falls in the same month as a large payroll run, the budget should show that overlap plainly.
Note the source of the cash for the purchase as well. Will it come from the opening balance, from collections, from a loan, or from an owner contribution? Cash from the balance reduces your floor room. A loan adds a payment to future quarters. An owner contribution changes the opening position for the next period. Writing the source beside the amount makes the consequences easier to see later.
A deposit paid when you place the order leaves in an earlier period than the delivery, so it belongs in the quarter when you pay it. Depreciation is a separate question; see service van depreciation mistakes.
Putting the three figures together
With the opening balance, the minimum, and the purchase amount and timing in hand, you can build the quarter. Start with cash on hand, add the cash you expect to collect, subtract the cash you expect to pay out, and see where the balance ends up. The purchase goes in as one of the payments. If the shop also buys parts each quarter, a quarterly materials budget can list those payments on their own line. If the balance stays above the floor in every period, the purchase fits the plan as it stands. If it does not, you have a clear picture of the gap and can test options against it.
Collections deserve more care than most owners give them. Cash coming in is not the same as the sales recorded on an invoice, because customers pay on their own schedules. A textbook budget shows when each quarter's sales will be collected, and the lesson for a shop is the same. Look at past invoices, see how long customers actually take to pay, and spread expected collections across the periods in which they will arrive. Do not assume that everything sold in a quarter is cash in that quarter.
The same textbook example includes a new product, which has no purchases in the preceding quarter, so its payments are $0. A business buying its first machine of a given kind may be in the same position. If there are no earlier commitments, the line for those payments can honestly be zero. If you have old balances or previous purchases on similar terms, those payments belong in the budget, and they often arrive at the same time as the new one.
After you build the quarter, ask two questions. What happens if the biggest customer pays a few weeks late? What happens if a repair or unexpected bill arrives in the same month as the purchase? You do not need a long list of scenarios. Two or three honest "what if" checks will show whether the budget has real room for error or only works when everything goes right.
Illustrative example: a quarter that stays at the floor
Suppose the opening balance is $10000 and the minimum is $5000. In month one, collections of $1000 cover recurring payments of $1000, so the balance stays at $10000. In month two, the $5000 purchase is paid, collections of $1000 cover recurring payments of $1000, and the balance falls to $5000. The purchase fits, but it leaves no room above the floor, so a small surprise would breach it.
Common mistakes to avoid
The first mistake is building the budget around the best case. An owner who assumes the largest customer will pay early, that no repair will come up, and that the new machine will start earning right away will produce a budget that looks good and is not useful. Use the expected case for collections and the realistic case for costs. If you want to test a better outcome, run it as a separate scenario rather than the base.
The second mistake is leaving out costs that are not on the purchase invoice. Delivery, setup, training, a first set of consumables, a service contract that starts immediately, and the power or space needed to run the equipment all cost money, and none of them may be in the quoted price. Put them in the purchase line or add a separate line directly below it, so the total cash need is visible.
The third mistake is treating the minimum cash balance as a target rather than a floor. The floor is not a number you aim for. It is the line you do not want to cross. If the budget shows the balance sitting right on the floor for weeks, the business has no margin, and any surprise will push it through.
The fourth mistake is building the budget once and never updating it. A cash budget is most useful when compared against actual results. At the end of each month, put the actual cash balance next to the forecast. Where they differ, find out why. Often the gap is a late payment or a cost that arrived early. Those lessons make the next budget more accurate and show how much cushion the business really needs.
The fifth mistake is leaving the owner's pay and withdrawals out of the picture. Money taken out for personal use is still cash leaving the account. If the budget shows a healthy balance while the owner has been drawing heavily against it, the floor will be tested sooner than the numbers suggest. Include those withdrawals as a line, and set them at a level the business can carry alongside the purchase.
The sixth mistake is deciding on the purchase first and then fitting the numbers to match. This happens when a sales rep, a dealer, or a deadline creates urgency. A useful check is to ask what the budget would look like if the purchase were delayed by one quarter. If the business is steadier with the delay, that steadiness has a value, and it should be weighed honestly against the benefit of getting the machine sooner.
Before you sign
Before you commit to a tool, van, or copier, write the three figures on the first page of the budget. Start with the opening cash balance, taken from actual bank records and labeled with its source. Set the minimum you will not go below, and do this before you look at the purchase so the floor is not bent to fit it. Then enter the full cash cost of the purchase, including the extra costs that come with it, in the quarter when the money will actually leave the account.
If the budget stays above the floor, the purchase fits this quarter on these assumptions. Write the assumptions down so you can check them later. If it dips below the floor, decide between delaying, reducing the scope or cost, and financing part of the purchase. Make the choice with the cost of each option in view, and record the reason. A year from now, that note will help with the next decision.
A cash budget will not tell you whether a machine is a good investment. That depends on the work it will do, the customers it will serve, and how long it will last. What the budget does is protect you from a different mistake: buying something the business can own on paper but cannot afford to pay for in practice. Set the three figures first, and the decision becomes clearer, calmer, and easier to defend to everyone in the office.
Your next step today: pull the bank balance for the first day of the quarter, write it at the top of a sheet, and label its source.
Frequently asked questions
What if the purchase drops the balance below the floor?
Delay the purchase, reduce its cost or scope, or finance part of it so the balance stays above the minimum.
Which costs go in the purchase line?
Enter the full cash cost you expect to pay, including delivery, installation, first supplies and any required service visit.