- Place washing facilities near the worksite, equipped so workers can remove coating substances
- When showering is required, provide body soap convenient to the shower and clean individual towels for each employee who showers
- Under UK CDM, keep washing facilities and their rooms clean and orderly, sufficiently ventilated and lit
- Check the safety data sheet for each product for any skin hazard designation, and check it against whether showering is required
After paint or coating work, three wash-up duties apply: washing near the worksite, soap and towels for required showers, and a clean, lit wash area.
Key takeaways
Why the last hour on site matters most
The paint is on. The rollers are in the bags. The customer signs off. Your crew is tired and wants to leave. This is exactly the moment your compliance risk is highest.
Paints and coatings leave residues on skin, hair and clothing. Some of these substances are known skin hazards. The rules around wash-up are not soft suggestions. They are clear duties that kick in during and after the work.
Two sets of rules apply to your crews. California work falls under Title 8 of the state regulations. UK construction work falls under the CDM 2015 regulations. They differ in detail but agree on the core idea. Workers need a way to get the harmful stuff off before they go home or eat lunch.
This post covers three duties you can hand to a crew at end of shift. Each one maps to a specific rule. Each one is checkable in under five minutes. Together they cover what your wash-up process must deliver after paint or coating work.
Duty one: wash facilities near the work
The first duty is placement. Your crew needs washing facilities within easy reach of where the coating work happens. Not across the parking lot. Not at the main site office a ten-minute walk away. Near the worksite.
The rule is specific about the trigger. When your employees apply paints or coatings, or do other work with substances that may harm them, you must provide washing facilities in near proximity to the worksite. The facilities must be equipped so workers can actually remove those substances. The wording comes from California Code of Regulations, Title 8, Section 1527 on washing facilities, food handling, and temporary sleeping quarters.
Read that closely. The rule says "near proximity to the worksite." It does not define a distance in that sentence. Your local inspector or the district office can tell you what counts as near on your specific job. Ask before you set up, not after a complaint.
The second half of the sentence matters as much as the first. The facilities must let employees remove the substances. The setup has to work for the actual removal of coating residue.
Practical setup for a mobile crew: identify the nearest plumbed sink or portable washing station before the first coat goes on. Walk your lead to it. Confirm it has soap and a means to dry hands. Note it on the job sheet. Your crew should never hunt for a wash point at end of shift.
For more on setting up crew facilities, see Lead hygiene facilities: 8 items to set up for the crew.
For UK construction sites, the CDM 2015 schedule sets out washing facility conditions. This matters on coating jobs where solvents may still be in the air. A dark, unventilated toilet block next to a spray area is not a safe wash-up point.
The same schedule requires washing facilities and the rooms containing them to be kept in a clean and orderly condition. If your crew shares a site wash area with other trades, leave it cleaner than you found it. A blocked drain or a soap-less dispenser becomes your compliance problem when the next trade reports it.
The separate-facilities rule is also worth knowing. CDM requires separate washing facilities for men and women, unless both sit in a lockable single-occupancy room. On a mixed crew, check this before day one. A single unisex washroom satisfies the rule only if its door can be secured from inside and its facilities are intended for one person at a time. Two open bays do not.
Duty two: showers, soap and towels when showering is required
The second duty covers the deeper clean. When your employer requires showering, or the applicable orders require it, the shower must meet the requirements laid out for shower facilities in Section 3366(f). That cross-reference is in the California rule set at Title 8, Section 1527.
What pushes you into shower-required territory? The employer or the applicable orders decide whether showering is required. The wording on skin contact appears in Title 8, Section 3366 on washing facilities, which refers to substances designated skin (S) in section 5155. Check the safety data sheet for each product your crew runs. If the SDS flags a skin hazard, check whether showering is required.
Two supply requirements ride along with any required shower. Body soap or other appropriate cleansing agents must be convenient to the shower. Clean individual towels must be provided to each employee who showers. Both requirements are listed in the same Section 3366.
Notice what that rules out. Soap that is not convenient to the shower does not meet the supply rule. Requiring workers to bring their own towels does not either. The soap sits within reach of the shower itself. The towels are individual and clean.
Here is how to check it fast. Stand at the shower door. Is the soap within arm's reach or a couple of steps? Are clean towels stacked within the same room or the immediate shower area? If either answer is no, fix it before the next shift.
For a mobile painting crew, this usually means a small kit in the job trailer: individually wrapped or dispensed soap and a pack of clean towels, staged next to whatever shower or wash point you have arranged. Restock daily. A pack that ran out yesterday is a gap today.
The CDM side adds the ventilation and lighting condition on the room itself. A shower room with no extract fan and a blown bulb fails the ventilated and lit test even if the water pressure is perfect.
Now compare the two rule sets side by side. The table gives each requirement with its source.
| Duty | Requirement | Source |
|---|---|---|
| California wash facility placement | Near proximity to the worksite, equipped so workers can remove coating substances | Title 8, Section 1527 |
| California shower soap | Body soap or other appropriate cleansing agent convenient to the shower | Title 8, Section 3366 |
| California shower towels | Individual clean towels for each employee who showers | Title 8, Section 3366 |
| UK wash facility placement | Readily accessible places, so far as reasonably practicable | CDM 2015, Schedule 2 |
| UK washing room condition | Clean and orderly | CDM 2015, Schedule 2 |
| UK ventilation and lighting | Sufficiently ventilated and lit | CDM 2015, Schedule 2 |
| UK men and women separation | Separate facilities, unless a lockable single-occupancy room | CDM 2015, Schedule 2 |
Use this as your end-of-job walkthrough.
Duty three: leave the wash area clean, lit and orderly
The third duty is housekeeping. Your crew touched the wash area. They leave it fit for the next person and for any inspection.
On UK construction work, these conditions sit in The Construction (Design and Management) Regulations 2015, Schedule 2.
What does clean and orderly look like after a coating crew? No paint-flecked gloves in the sink. No solvent rags near the drains. No spent scouring pads on the floor. Soap dispenser full. Towels topped up if you stocked them. Floor swept or mopped if the crew tracked residue in.
Ventilated and lit is the other half. If your wash room has an extract fan, check it runs. If the bulb is out, replace it before you demobilize. On a coating job, fumes can linger in a small enclosed room. A working fan is not cosmetic.
The separate-facilities condition has a carve-out worth planning around. Separate facilities for men and women are required unless everything sits in a room whose door locks from inside and the facilities in that room are meant for one person at a time. On a small crew, one lockable washroom can satisfy the rule. On a large crew with a short break window, you may need two separate rooms, or one lockable single-occupancy room for each user at a time.
California's cross-reference to shower requirements also implies a condition on the shower room itself. Section 3366(f) carries the shower-specific conditions. Read it before you sign off on a new job site's wash setup.
A quick end-of-shift walkthrough covers this duty. Have the lead do four checks before the van pulls out:
- Soap or cleansing agent present and within reach of the wash point
- Individual clean towels available if showering is part of your setup
- Room clear of debris, rags and spent supplies
- Fan running and light working in the wash room
None of these take long. Each one is a failure an inspector or the next trade can find in seconds.
Building the wash-up checklist into dispatch
Your dispatch process is where this gets reliable. If wash-up is a line on the job sheet, leads will do it. If it is not, it depends on who remembers.
Put three fields on every coating job sheet. First, wash point location on site. The lead fills it in on arrival, before the first coat. Second, wash supplies staged: soap, towels, and anything the shower rule requires for your product mix. Third, end-of-shift sign-off: fan on, light on, room clear, supplies restocked.
Have the lead photograph the wash point on arrival and again at sign-off. Photos cost nothing and end disputes. If a customer complains your crew left a mess, you show the second photo.
For product selection, pull the SDS the week before the job. Flag anything carrying a skin hazard designation. That designation is one trigger to check against whether showering is required. It also tells your crew which residues they are washing off.
For the dispatch side of this, see Field Service Work Order Checklist for Dispatch Handoffs.
What your crew needs to know before the first coat
Brief the crew at the morning huddle, not in a text the night before. Three sentences are enough.
Wash point is here. Walk to it with me now. Soap is here, towels are here, shower is there if we need it.
Then tell them the rule in your own words. If this product touches your skin, you wash it off before you eat, before you drive, and before you go home. The soap sits by the sink or shower for that reason.
End the shift with the same brief in reverse. Wash up, restock, sign off, go. If your lead does this every day, it becomes routine.
Who to ask when a rule is unclear
Some questions need a site-specific answer. For example, the rule does not fix a maximum distance for "near proximity" on a California job. Ask your local Division of Occupational Safety and Health district office what they expect on your site.
For UK work, check the wash facilities against the Schedule 2 conditions: suitable and sufficient, ventilated and lit, clean and orderly, with separate facilities for men and women unless the lockable single-person exception applies. Ask the site contact where the facilities are and whether they meet that exception for a mixed crew.
If you are unsure whether a product triggers the shower requirement, the SDS is your first stop. Your supplier can also confirm. Do not guess on a product you have not read.
The honest position is this: rules are written in general terms so they can apply to many kinds of work. Your job-specific answer comes from the people who enforce it on your site. Ask early. A ten-minute call beats a stop-work order.
Putting all three duties into one end-of-shift routine
Run the three duties as one routine. Do not treat them as three separate compliance topics. They are one flow.
Walk to the wash point. Check supplies. Wash up. Restock. Check the room. Sign off. Photograph. Leave.
Your lead does the walk. Your dispatcher checks the sign-off before closing the job. If the sign-off is blank, the job stays open on the board. That single rule at dispatch makes the field routine stick.
For multi-day jobs, reset every morning. Soap runs out. Towels get used. The fan gets switched off. Recheck on day two the same way you checked on day one.
For subcontracted crews, put wash-up in the scope. Tell them where the wash point is. Tell them the supply expectations. Tell them the sign-off you expect. If they will not sign it, you carry their gap on your record.
Illustrative example: a two-day coating job
A crew of 5 finishes a two-day coating job. On day one, the lead walks to the wash point, confirms soap and towels are staged, and notes the location on the job sheet. At the end of each shift, the lead runs the five-minute checklist below. On day two, the lead repeats the walk, restocks the soap, and photographs the wash point at sign-off.
The five-minute end-of-walk checklist
Hand this to your lead. No clipboard needed.
Wash point reachable. Walk it on day one. Confirm it is still open and usable on the last day.
Soap staged. At the wash point, not in a supply closet across the site.
Towels ready. Individual clean towels if showers are part of your setup.
Room clear. No rags, gloves, scourers or debris left behind. For the debris side, see Job site debris: 5 checks before crew handoff.
Fan and light working. Ventilated and lit, ready for the next person.
If any box is unchecked, fix it before the van moves. That is the whole routine. It takes five minutes and covers the three duties. Today, hand this list to your lead and walk the wash point together before the next shift.
Frequently asked questions
What if the customer's site has no nearby wash facilities? Raise it before the crew arrives. The rule expects washing facilities in near proximity when coating work happens. If the site has no plumbed point near the work, discuss portable options with your customer or the site contact. Document what you agreed.
Does every paint job require a shower? No. Shower requirements apply when the employer requires showering or the orders require it. The quoted Section 3366 text refers to skin contact with substances designated S in section 5155. Check the SDS for each product. If there is no such designation and you do not require showering, the general wash point still applies.
Who restocks soap and towels during a long job? Assign it. Put it on the lead's daily close-out, alongside the fan and light check. Restocking after every shift costs a minute. Discovering an empty dispenser mid-job costs more.
Can our crew share one washroom with other trades? Only if the room meets the separate-facilities rule: separate facilities are required for men and women unless the room locks from inside and is intended for one person at a time. Confirm any shared arrangement with the site's management before the crew relies on it.
What should we do if the wash room light or fan is broken? Report it and fix it before you leave if it is in your control. For UK CDM work, the room must be sufficiently ventilated and lit and kept in a clean and orderly condition. On a shared site, log it with the site contact.
How do we check which products may call for showers? Pull the safety data sheet. Skin hazard designations are one trigger to check against the shower requirement. Ask your supplier if the sheet is unclear. Set the wash plan from that answer before the crew loads the van.