Straight into the service manual page
WrenchQuarry
More

Floor price for a one-off job: 3 cost parts

WrenchQuarry Editorial Team · Published · 13 min read · How these guides are written

The floor price for a one-off repair job is the lowest price worth accepting: its direct costs, variable overhead, and the bay time it displaces. A one-off job is the call that comes in on a busy afternoon, or the regular who wants a brake check squeezed in between two booked appointments. The owner or dispatcher has to answer fast, and the easy move is to quote the usual rate and hope it works out. Sometimes it does. Often the shop ends up doing the work for very little left over, or it gives up a better job and never notices.

Key takeaways

  • Set the floor before the call ends, and quote only above it.
  • Build direct costs from the actual work order, at today's prices, with labor at what it costs you rather than the billing rate.
  • Add the variable overhead that moves with the hours the job takes.
  • When a booked job or bay is displaced, add the margin you would give up for the hours the extra job uses.

A steadier approach is to work out the floor price before the call ends. The floor is the lowest price you can accept and still be better off than saying no. It is not your target, and it is not what the customer hopes to pay. Above the floor, you have room to talk and to offer options. Below it, you should decline the job or refer it out.

One-off jobs deserve their own check because they break the pattern that the regular schedule sets. The shop knows the usual cost of a standard brake job, and that familiarity tempts you to skip the math. An extra job may use a bay that was open for a reason, may need a part you do not stock, and often arrives with a deadline that makes the price feel fixed. A short floor check guards against all three pressures.

Textbooks in cost accounting treat this kind of decision as a special order. A business gets an offer for extra units at a price it did not plan for, and the question is whether that price covers the costs that actually change because of the order. The OpenStax chapter on special orders works through the idea with a chair maker. The example is about furniture, not cars, but the reasoning carries over to a repair bay.

Three cost parts set the floor for most one-off work. The first is the direct cost of the job itself. The second is the variable overhead that rises with the work. The third is the cost of the time and space the job takes away from something else. The last one does the most damage when it is missed.

Start with the direct costs

Direct costs are the costs you can trace to this job and no other. In a repair shop, that usually means the parts, the fluids and consumables that go into the vehicle, any sublet work you pay another shop to do, and the labor hours the job needs. If the money would not leave the business without this job, it belongs in this group.

The chair example in the OpenStax chapter splits unit cost the same way.

Build your own list from the actual work order rather than from memory. For a related sheet, see Job cost sheet: 3 cost lines to total on every job. A job that looks like the last three brake jobs can still need a different caliper, a different set of fasteners, or an extra hour to get a stubborn bolt out. Write down each part at what it would cost you today, not at the price on an invoice from last spring. Prices move, and an old invoice is an easy way to undercount.

Parts that are not on the shelf deserve their own check. If the job needs a part you have to order in for this one car, the price may include freight, a rush fee, or a restocking charge if the part comes back unused. Put those on the parts line, since they are part of what the job costs you. If the part is already on the shelf, use what it would cost to restock it today.

Labor needs the same care. If your technicians are paid by the hour, the labor cost of this job is what you pay for the hours it takes, not the rate you bill the customer. A billing rate is revenue. Putting it into a cost line pushes the floor too high, which makes good work look unaffordable and makes the shop turn down jobs it should take. If you pay on a flat-rate basis, convert the job into the pay it actually generates and use that number instead. For more on flat-rate pricing, see Flat-rate pricebook price: 3 parts to build in.

Count the hours that are easy to forget, too. A job that needs a test drive, a second visit to confirm a fix, or a wait for a part that arrives after lunch still ties up a technician. If a job is known to run long, the labor line should show it, even when the customer would like a single price quoted up front.

Jobs taken outside the normal schedule often carry labor costs that a booked job does not. If the work is done after closing, the pay for those hours may be at an overtime or premium rate. That premium belongs in the labor line, not hidden in an average. If the job needs a helper to hold a part or move a car, count that person's hours too.

Keep unrelated work out of the number. If the car comes in for a battery and you also notice worn wipers, the wipers are a separate job with a separate floor. Mixing them into one total makes it harder to decide each piece on its merits. A customer may say yes to one item and balk at the other. Give each item its own floor so that each price is judged on its own numbers.

Add the overhead that moves with the job

Variable overhead is the cost of running the shop that rises when you take on one more job. It does not show up on a parts list, but it grows as the volume of work grows. Shop towels, gloves, cleaning solvent, disposal of used fluids, the power used by a lift and a diagnostic scanner, and wear on tools all belong here when they go up with the hours you work.

The chair example puts a number on this idea. The cost to produce one chair includes "variable overhead of $300." That amount moves with each chair produced. A repair shop will have a different list and different amounts, but the test for whether an item belongs is the same.

To sort your bills, take last month's statements and ask of each one: would this have happened if the shop had taken no extra work this month? If the answer is yes, the cost is fixed. Rent, insurance, and the base fee on shop software usually fall in that group. If the cost went up because the shop worked more hours, it is variable. Disposal fees for used fluids, the supply order for gloves and rags, and the extra electricity for running the lifts all tend to rise with the work.

A simple way is to divide last month's variable supply spend by the labor hours billed that month. The result is a rough dollar amount per hour that you can apply to the one-off job. It will not be exact, and it does not need to be. The goal is a floor that is honest enough to make a good decision.

A one-off job also carries setup costs that a booked job usually does not. Opening the bay early, running the compressor and lights for a single car, and the minutes a dispatcher spends fitting the job in and calling the customer back all add up. Write them down next to the supplies, since no invoice arrives for them.

Keep fixed costs out of this step. It is tempting to load the full overhead bill onto the extra job, since the shop has to pay it anyway. That approach treats every job as if it alone must pay the rent, and it pushes the floor so high that the shop turns away work that would have helped cover those bills. Fixed costs belong to a different question, which the next section takes up.

Count the slot you would give up

This is the part most owners miss, and it decides whether an extra job is really profitable. An extra job does not only use parts and labor. If the bay, the lift, or a technician's afternoon is already committed to other work, taking the extra job means giving up whatever that time would have earned.

The OpenStax example shows when this matters and when it does not. The chapter says that Franco "has the capacity to produce 5,000 chairs per year and currently is producing 4,000." It also says that "Fixed overhead costs of $1,350,000 are met by selling the first 3,000 chairs." Then an offer arrives to buy 800 more chairs at a price the chair maker did not plan for, which is the same position a dispatcher is in when a customer calls with a special request. The chapter's conclusion is direct: "Since Franco has already met his fixed costs with current production and since he has the capacity to produce the additional 800 units, Franco only needs to consider his variable costs for this order."

The first case is an open bay with fixed costs already covered. The shop has the room, and the regular work for the month already pays the rent, insurance, and other fixed bills. An extra job in this situation only has to cover its own direct and variable costs. Anything above that is money that would not otherwise exist. The chapter reaches the same kind of result: by accepting the special order, Franco would meet his variable costs and make $150 on each chair. In a repair shop, the equivalent is a job that pays more than its parts, labor, and supplies, using hours that would otherwise sit empty.

The second case is a full bay. If the technician or the lift is committed to a booked job, the extra job carries a cost in the form of the margin you give up on the job you would bump. The comparison is not between the extra job and zero. It is between the extra job's margin and the margin of the job it displaces, measured per hour of bay time. Use margin here, meaning what is left after direct and variable costs, not the total invoice of either job.

A third case sits between these two. Sometimes the month is slow, and the regular work has not yet covered the fixed costs. In that situation, a share of those fixed costs belongs in the floor, because any work that does not carry its share adds to the gap. When fixed costs are already met, only variable costs count. Fixed costs decide which floor applies, even though they do not usually belong in a single job's price.

Dispatchers should also think about the customer you would be bumping, even when no money changes hands. A regular who is moved off a slot may take the car somewhere else next time. That risk is real, but it is hard to put a dollar figure on it. Do not pretend it is zero. Write it down as a reason to decline, or as a reason to offer a different slot. Agree on the rule ahead of time, so the phone call does not turn into a guess under pressure.

Partial overlap is common too. The bay may be free for the first two hours of a morning and booked from noon on. In that case, count only the hours that would collide with the booked work. A job that fits inside the open window does not push out the afternoon job, so the margin you give up for those hours is zero. Check the calendar by the hour, not by the day.

Put the three parts on one sheet

The fastest way to use these ideas is to write them on one sheet before you answer the call. It does not need to be fancy. A single page with the three parts and a few questions keeps the decision consistent from one person on the phone to the next.

Start with the chair example, because it shows the arithmetic cleanly. The direct materials of $750, direct labor of $600, and variable overhead of $300 are the costs that move with each chair. The chapter's point is that when there is spare capacity and fixed costs are covered, the floor for a special order is its variable cost. The price only needs to clear that floor to be worth taking.

For a shop, the sheet turns into four questions. First, what do the parts, supplies, and labor hours for this job cost? That is the direct cost. Second, what variable overhead per hour applies to the hours this job needs? Add it. Third, is there a booked job this one would push out? If so, add the margin per hour you would lose for the hours it uses. Fourth, are the fixed costs for the month already covered by work on the books? If they are not, add a share of them for the hours you take on.

The first two answers give you the bare floor for an open bay with fixed costs covered. Add the third or fourth if the answers call for them. The total is the floor. Anything above it is room to negotiate, and anything below it is a reason to decline or refer the job out. When the hours are uncertain, give the labor line a range and use the high end for the floor. A job that runs long is the usual way a one-off quietly loses money, and the sheet should show that risk before the work starts.

The floor is for your decision, not for the customer's ears. When you quote, describe the work and the time it takes, and offer the options that fit above the floor. A dispatcher who says "we can fit you in this afternoon at this price, or in a later slot at the regular rate" is working from the same sheet without walking the customer through the inner numbers.

Keep the sheet with the work order. When the job closes, compare the real parts cost and the real hours with what you wrote down. If the labor ran over, or a supply item cost more than expected, note it on the sheet. Over a few months, the sheet becomes your own version of the textbook example, with your parts and your hours in place of the chair maker's numbers.

The floor price is a tool for deciding quickly, not a way to predict everything. A rough estimate that is honest about its assumptions will serve a shop better than a precise-looking number built on guesses. Start with the direct costs, add the overhead that moves with the work, then check whether the bay has room and whether the fixed costs are already covered.

Illustrative example: a one-off brake job

Suppose a one-off brake job needs $300 of parts and $500 of labor, and the bay is open with fixed costs already covered. The direct costs come to $800. Add the variable overhead for the hours, and that sum is the floor. Now suppose the same job would push out a booked job with a margin of $150. The floor then rises by $150 to cover the displaced work. This is an illustrative set of figures, not a quote for any real shop.

Next step: before your next one-off call, write the four questions on one sheet and keep it with your work order checklist.

Frequently asked questions

Should the floor be the price I quote?

No. Quote the work and the time it takes, and offer options above the floor.

Which costs go into the floor for a one-off job?

Direct costs and the variable overhead that rises with the hours, plus the margin lost on any booked work the job pushes out.

When do fixed costs belong in the floor?

Only when booked work has not yet covered the month's fixed costs; then a share of them belongs in the floor.

Sources

More field guides