- Rebuild a real job from last month in each trial instead of using made-up data.
- Read each vendor's trial terms on the day you sign up.
- Get written answers on fees, plan changes and what happens to your data if you leave.
- Give each role its own tasks and spread the test over four weeks.
To test invoicing software before paying, use the free trial to run a real job through the full billing cycle. The software touches every job you bill, every technician's paperwork, and every payment that comes in. If you pick the wrong tool, your office ends up re-entering customer details, fixing invoices by hand, and chasing payments in a spreadsheet you were trying to get away from.
That is why a free trial matters. A trial lets you find out whether the software fits how your office actually works before you commit money or sign a contract. This guide walks through how to use a trial well. It uses FreshBooks as a concrete example, because FreshBooks publishes its trial terms clearly. Other vendors may offer different terms, so check each one yourself.
Key takeaways
What a free trial is for
A trial is a test drive, not a sales call. You are trying to answer three practical questions. Can your office create a correct invoice in a few minutes? Can your customers pay it without calling you? Will the reports at the end of the month match what you already know about the business?
FreshBooks describes itself as "an online accounting and invoicing service," and its pricing page makes the same point about trying it first, saying the best way to decide is a 30-day trial. (FreshBooks pricing)
Treat that advice literally. Pick a short list of two or three products, then run each one through the same test. Comparing them side by side under identical conditions tells you far more than reading feature lists. Marketing pages all sound similar. A real invoice does not.
Read the trial terms before you sign up
Before you create an account, read the terms. Three things matter most for a small firm: how long the trial lasts, whether it requires a payment card, and whether it locks you into a contract.
For FreshBooks, the published terms say that as a small business owner you get unlimited access to the software for 30 days, with no contracts and no credit card required. The same page says that "With the free trial, you can use FreshBooks at no charge for 30 days (no credit card required)." (FreshBooks pricing)
No card on file means you can test without a payment decision on day one. That matters when the people doing the testing are not the ones who sign off on purchases. It also means nobody gets billed by accident while the team is still learning the tool.
Read the terms on the vendor's page on the day you sign up, not from a review written last year. Trial rules change, and the page is the document that counts.
Finally, ask the vendor what happens to your data if you decide not to continue. Get the answer in writing. A trial is only useful if you can leave it cleanly, and a vendor that answers this question clearly is giving you information about how they will treat you later.
Compare the terms side by side
Vendors package trials and guarantees differently, so put the terms in one place. The table below sets the terms side by side. It covers FreshBooks and one example of how another vendor describes plan changes.
| Item | What the source says | Source |
|---|---|---|
| Trial length | 30 days of free use | FreshBooks pricing |
| Payment card | No credit card required during the trial | FreshBooks pricing |
| Contracts | No contracts during the trial | FreshBooks pricing |
| Money-back promise | Contact within the first 30 days after purchase for a full refund | FreshBooks pricing |
| Plan changes | Changing a plan does not rewrite invoices already generated | ERPNext subscription plan docs |
Notice that the refund promise is a different thing from the trial. The refund applies after you have paid, and it starts counting from your purchase. It is a safety net, not a replacement for testing. If the trial does not show you enough, the refund is not a reason to skip the trial.
The plan-change row comes from ERPNext's documentation, which describes a different product. It is included because the question it answers applies to any invoicing tool: what happens to invoices you already sent when you change your plan? Ask every vendor the same question.
Set up a realistic test
Do not test with made-up data. Pick a real job from last month, ideally one with labor, parts and a return visit, and rebuild its invoice from scratch in the trial. Use the same customer name format, the same service address, the same line items and the same tax treatment your office uses now. If the invoice looks different from what your customers are used to, you will find out early.
Work through the full cycle, not just the invoice screen:
- Create a customer and a job, the way a dispatcher would when a call comes in. For the handoff step, see the Field Service Work Order Checklist for Dispatch Handoffs.
- Build an invoice with labor and materials, and check the totals by hand.
- Send the invoice to a test email address you control, and open it on a phone.
- Record a payment against it, and check that the balance updates.
- Look at the report that would show this job in a monthly summary.
Write down every step that took longer than it should have. Those notes will matter more than your impression of the design. A tool that looks clean but takes many extra clicks to send an invoice will cost you time every week after you pay.
Illustrative example: one job through the full cycle
A dispatcher rebuilds 5 real jobs from last month in the trial. Each job goes through the full cycle: create the customer, build the invoice, send it to a test address, record a payment and check the monthly report. After 5 jobs, the office has a list of slow steps and a clearer answer on whether the tool fits. The count is illustrative; your office should use enough jobs to cover its usual mix.
Test the features your office depends on
FreshBooks describes its software as automating "daily accounting activities namely invoice creation, payment acceptance, expenses tracking, billable time tracking, and financial reporting." That list is a useful checklist. You do not need every feature, but you do need the ones your office uses every day, and you should confirm that each one works the way you expect.
Start with invoice creation and payment acceptance, since those touch customers directly. Then check expenses, because parts and supplier costs are part of what you need to recover on a job. Billable time matters for a trade business: find out whether a technician's hours can flow onto an invoice without someone retyping them. For a related check, see Time tickets for direct labor: 3 checks before billing. Financial reporting comes last, but it is where you find out whether the numbers hold up. Compare one month's report against your bank statement and your own job log.
Also ask whether the software handles the exceptions your business sees often. Warranty work, callbacks, deposits on a large install, and partial payments are common in HVAC, plumbing and electrical work. A tool that only handles simple one-visit jobs will create extra work every time something unusual happens.
Check access from the truck and the office
FreshBooks says its software is "100% web-based, meaning you can access them anywhere." For a field business, that claim is worth testing directly rather than accepting. (FreshBooks pricing)
Log in from the office computer, then from a phone, and if you have one, a tablet. Try a task from each device: create an invoice, check a customer balance, and look up a past job. Test in a place with weak signal, because that is where a field team will feel any slowness. If a dispatcher needs the software while on a call, the screen should load quickly and the buttons should be easy to hit.
Web-based access means you do not install software on each machine, but it does mean your team depends on the internet connection. Ask what the vendor does when a connection drops in the middle of entering an invoice. Then test it by turning off Wi-Fi halfway through a draft.
Have each role test its own part
Owners and dispatchers look at different things, and a trial should reflect both. An owner cares about pricing, margins, reporting and whether the numbers can be trusted at tax time. A dispatcher cares about how fast a job becomes an invoice, how easy it is to answer a customer's billing question, and whether the schedule and the paperwork agree.
Assign each person a short set of tasks in the first week. Give the dispatcher the job-to-invoice flow and a few customer questions to answer. Give the owner the monthly report and the payment and fee checks. If you have a technician who will use the tool, have them try the mobile view on a real job. Ask each person to write down, in one or two sentences, what they found confusing. Those notes will be more useful than a general opinion at the end.
Keep the trial focused on people who will use the software every day. Someone who checks an invoice once a quarter is not a good test of day-to-day use.
Plan the four weeks
Four weeks is enough time to learn a tool, but only if you spread the work out. A rough plan looks like this, though you should adjust it to your own calendar.
In the first week, set up the account, enter your real price list and customer format, and have each person complete their starter tasks. Do not judge the tool yet. You are still learning where things are.
In the second week, run real jobs through it. Use the invoices you would normally send that week, but keep a copy of the old process running in parallel so you can compare results. This is the week where you find the gaps.
In the third week, test the uncommon cases: a warranty callback, a deposit, a partial payment, a customer who disputes a line item. Check how the software handles each one and how long it takes.
In the fourth week, review the reports, compare them against your bank records, and decide. Leave yourself a few days before the trial ends. Waiting until the last afternoon to make a decision leaves no time to ask the vendor questions.
Watch how plan changes affect old invoices
Most firms do not stay on the same plan forever. You might start with fewer users and add technicians as the business grows. Before you move to a different plan, confirm what happens to invoices you have already created.
The ERPNext documentation, which covers a different product, says: "Changing a plan does not rewrite invoices that have already been generated." (ERPNext subscription plan docs) That is the kind of statement you want from any vendor. Ask it in writing: when I change plans, do my existing invoices, customer records and payment history stay exactly as they are?
If the answer is unclear, treat that as information. A vendor that cannot explain how invoices behave during a plan change may cause problems later, when you are busy and least able to untangle them.
Be careful with payment fees
Invoicing and payment processing are often sold together. A trial may show you a clean invoice and a pay button, but the real cost sits in the fees charged when a customer pays by card or bank transfer. During the trial, find out which fees apply, when they are charged, and how they appear on your statements.
Ask the vendor for a written list of every fee that applies to a customer payment. Compare that list with what your current card processor charges you. Do not assume the total is similar because the invoice looks similar. A fee that looks small on one invoice can add up across a busy month.
Also check how payments show up in your reports. If a customer's invoice is paid and a fee is taken out before the money reaches your bank, your books should show both the gross amount and the fee. If the software only shows the net, you will have trouble matching deposits to jobs at month end.
Avoid these common trial mistakes
Several mistakes come up again and again when small firms test invoicing software. Avoid them and your trial will tell you more.
The first is testing with fake customers and invented jobs. Easy data hides the problems that matter. Use a real job and real line items, even if you have to remove the customer's private details.
The second is testing alone. The owner may like the tool while the dispatcher hates it. If the people who will use it every day are not part of the trial, you will discover their objections after you have paid and switched.
The third is ignoring the exit. A trial that does not explain how to leave, export your data or cancel is not a free trial in any useful sense. Ask the question before you enter any real customer information.
The fourth is deciding based on the first impression. Many tools feel slow or confusing on day one because the screens are unfamiliar. Give each feature a fair test before you judge it.
Make the decision
At the end of the trial, sit down with your notes. Look at the time each task took, the errors you found, the reports you checked, and the answers you got from the vendor. Ask simple questions. Did the office create invoices faster than before? Did customers find it easier to pay? Did the monthly numbers match what you already knew? Did every person on the team finish their tasks without needing help from someone outside the office?
If the answers are mostly yes, and the terms are clear in writing, you have a reasonable basis to pay. If the answers are mostly no, you have learned what you need in a few weeks, which is far cheaper than discovering the same problems after you have switched and retrained your team.
Either way, keep your notes. They are the best record you have of what your office needs from invoicing software, and they will help you the next time you compare tools, whether that is next year or after your business has grown.
The free trial is a tool, not a promise. Use it to get real answers from real work, and make your payment decision only after you have them.
Your next step today
Today, choose the two or three products on your shortlist and write down the one real job you will rebuild in each trial. Then open each vendor's pricing page and note its trial length, card rule and contract terms.
Frequently asked questions
Is a free trial enough to choose invoicing software?
A free trial is enough to test whether the software fits your office, but get the fee and plan-change answers in writing before you pay.
Does FreshBooks require a credit card for its free trial?
No. FreshBooks' published terms say its free trial requires no credit card.
What should you check before the trial ends?
Check how long each task took, whether the monthly report matches your bank records, and what the vendor told you in writing.