- Measure the labor gap in hours before you compare pay rates.
- Cost each option with benefits, payroll, training, and equipment, not just the hourly wage.
- Judge each option by billable hours, not paid hours.
- Set a written coverage map for off days before you post the job.
Choose part-time for an uneven or seasonal labor gap and full-time for a steady gap near 40 hours a week. The rest of this post shows how to test that choice.
Key takeaways
Why this decision is harder than it looks
Most owners of small field-service firms reach this point the same way. Call volume climbs, the board fills up, and your best technician is eating lunch in the truck to keep up. You need another person. The open question is whether that person should work 20 hours a week or 40.
On the surface, it looks like a pay question. Twenty hours costs less than forty, so part-time must be cheaper. That is true in a narrow sense, but it skips the parts of the decision that cost you money or time later: benefits, payroll paperwork, scheduling gaps, training, and how much of each paid hour actually produces billable work.
This post gives you a way to compare the two options side by side.
Start with the work you need covered
Before you compare pay rates, write down the work. Many owners hire for a feeling ("we are drowning") instead of a defined amount of labor. That leads to a hire who is either too busy or too thinly used.
Make a simple table for a normal week. List each weekday, the hours of calls you already turn away or push back, the hours your current techs spend on overtime or on work that could go to someone else, and any predictable peaks such as a seasonal rush, a recurring maintenance contract, or a weekend emergency window. Add up the hours. That total is the labor gap you are trying to fill.
Then ask a harder question: is the gap steady or uneven? A steady gap of 40 hours a week points toward full-time. An uneven gap, such as a heavy Monday and a quiet Thursday, points toward part-time or toward a schedule that lets the person shift hours to match demand. Neither answer is automatically right. Your data decides.
A worked example from a textbook
OpenStax's managerial accounting text includes a decision problem that lays out the same choice in plain numbers. It describes the part-time option this way: "Each college student would work half days totaling 20 hours per week, and would earn $12 per hour." The full-time option is described as: "The full-time employee would work full days 40 hours per week and would earn $12 per hour plus the equivalent of $2 per hour in benefits." (OpenStax, Identify Relevant Information for Decision-Making)
The textbook uses these figures for a teaching problem, not for your shop, so do not copy them. Use the same method with your own rates. The method is simple. For a part-time hire, weekly wages equal weekly hours multiplied by the hourly wage. For a full-time hire, add the value of benefits per hour to the wage, then multiply by weekly hours.
Using the textbook's rates as a test case:
Part-time, weekly:
- Wages: 20 hours × $12 per hour
Full-time, weekly:
- Wages: 40 hours × $12 per hour
- Benefits: $2 per hour on each of 40 hours
Two points follow. First, the full-time hire works twice the hours and adds a benefits cost on top, so the weekly total rises by more than the hours alone suggest. Second, the benefits value is added to every full-time hour, so the cost of each paid hour is higher for the full-time person than for the part-time person. The extra hours from full-time only pay off if they produce work you can bill.
The benefits assumption changes the answer. If you put no value on benefits, the two options cost the same for each paid hour. If your benefits cost more than the example's $2 an hour, the gap in hourly cost widens. Ask your payroll provider or accountant for your real figure before you decide.
That last point matters more than most owners expect. A cheap hour is only cheap if it gets used. If your part-time person spends half the shift waiting on parts, driving between unrelated stops, or cleaning the shop, the real cost of each useful hour can be higher than the full-time person's.
Costs people forget
Benefits. The example above puts a dollar figure on benefits, but your actual cost depends on what you offer. The U.S. Small Business Administration suggests that owners consider an employer-sponsored plan such as a 401(k) or a pension plan. (SBA, Manage your business) Retirement plans are one option among many. The point for this decision is that a full-time hire often pushes the conversation toward benefits, while a part-time hire may not. Decide which benefits you will offer to which roles, put them in writing, and cost them out before you make an offer. Changing benefit promises later is hard on everyone.
Payroll paperwork. This cost does not shrink with hours. The IRS guidance on employment taxes says that "Generally, employers must report wages, tips and other compensation paid to an employee by filing the required form(s) to the IRS." (IRS, Depositing and reporting employment taxes) That duty applies to the employer, whatever the hours. A 20-hour employee still needs accurate payroll records, year-end reporting, and a correct withholding setup. The same page includes a step to file Copy 1 with an employee's state or local tax department, so your payroll process needs to cover state and local filings as well as federal ones.
Training and turnover. Every new hire takes time from your existing people. Someone has to show the new tech your job-tracking software, your truck stock list, your customer rules, and which buildings have locked gates. Part-time hires can be harder to train because they are on site fewer hours, so each training session takes a bigger share of their week. Turnover costs that training time again. If a full-time hire is more likely to stay, that may matter more than the hourly rate. This is a judgment call, not a rule. Your own turnover history is the best guide.
Vehicles, tools, and devices. A second person may need a truck, tools, a phone, uniforms, or a required certification. Check whether each cost is per person or shared. Part-time hires sometimes share a truck with another tech, which can cut vehicle costs but can also create scheduling conflicts. Write down who owns each item and what happens to it when the person leaves.
What capacity really means in the field
Capacity is the core of this decision, so it is worth being precise. The OpenStax chapter on special orders makes a point that carries over to field service: "Labor capacity is typically easier to increase on a short-term basis than equipment capacity." (OpenStax, Evaluate and Determine Whether to Accept or Reject a Special Order)
In a field-service shop, that means you can often add hours through a person faster than you can add a service truck or a specialized machine. Hiring is usually the quickest lever you have. But it works only if the person can actually produce work with the equipment you already own. A new part-time tech with no van may add very little, because the van is the constraint. Check both labor and equipment before you commit.
This also changes how you think about peaks. A part-time hire can cover a short-term rush without a permanent commitment to 40 hours. A full-time hire fills a gap that is still there after the rush ends. Neither is wrong, but you should know which kind of gap you are filling.
When each option tends to fit
Part-time tends to fit when:
- The work is seasonal, or the peaks do not add up to a full week.
- You need help on specific days or time blocks, such as a Saturday emergency window, and not across the whole week.
- You want to test demand before committing to a permanent cost.
- Your existing team already has the skills, and you need help with specific tasks such as scheduling, parts runs, or light installs.
Full-time tends to fit when:
- The gap is steady at 40 hours a week or close to it.
- You need a dependable person who can carry a route or own a set of customers.
- Your schedule includes early, late, or weekend work that must be covered reliably.
- You plan to train the person into a lead tech, dispatcher, or supervisor role.
Each option has real drawbacks. Part-time brings coverage gaps, slower training, and the risk that the person takes a better-paying full-time job elsewhere. Full-time brings a larger commitment, a harder time reversing the decision, and benefits that are difficult to take back. Plan for the drawbacks you are choosing instead of ignoring them.
Dispatch makes or breaks part-time
Dispatchers feel the schedule first. A part-time tech who works Tuesday through Thursday leaves Monday and Friday to whoever is left. Your dispatch rules need to say which jobs a part-time person may take, which they may not, and who decides when an emergency lands on an off day. Without those rules, every off-day call becomes a phone argument. For a fuller handoff process, see the Field Service Work Order Checklist for Dispatch Handoffs.
Write a short coverage map: for each day and time block, the name of the person on call and the backup. If you cannot fill the map, that is a sign you need more hours, not fewer. A coverage map also shows you where a second part-time person might fit better than one full-time hire. For more on tools for this, see technician scheduling tools.
Ask your dispatcher what they would need to keep a part-time schedule working. They see the calls that come in on the off days, and they know which customers push back. Their input will save you from a schedule that looks neat on paper and falls apart in practice.
Protect the customer experience
Customers do not care whether the person who shows up is part-time or full-time. They care whether someone answered the phone, whether the tech arrived in the window you promised, and whether the job was done right. A part-time schedule can hurt those outcomes if you do not plan for them.
Set a response standard for calls and quotes, and decide who handles messages on the days your part-time person is off. Plan your customer arrival updates before the hire starts. If you promise an arrival window, make sure someone is actually scheduled to fill it on every day you take calls. Watch your callback rate and your complaints for the first few months after the hire. Those numbers show coverage gaps faster than payroll reports do.
Pay structure and fairness
Hourly pay is the simplest setup for part-time roles, because the paycheck tracks the hours worked. Full-time roles are often set as a weekly or annual figure. Whichever you choose, keep the rules the same across people doing the same work. A part-time tech who does the same job as a full-time tech and is paid less per hour will feel the gap quickly, and that feeling shows up in turnover.
Explain the difference to your staff in plain words: what the pay covers, what it does not include, and how hours are set. Vague answers invite resentment. Clear answers, even unwelcome ones, give people something to plan around.
A mixed path: start part-time, then decide
Some owners use a trial period. Hire part-time for a defined stretch, track the billable hours and the coverage gap, then decide whether to add hours or hire full-time. This works best when you write the expectations in advance: what the person will do, what hours they will work, how you will review progress, and what would trigger a change.
Without a written plan, a trial turns into a permanent part-time role that nobody is happy with. Two part-time people covering different days can match peaks better than one full-time person, but they double the training and coordination work. Choose that path only if you can handle the extra admin.
Mistakes that cost owners the most
- Comparing hourly rates and ignoring benefits, payroll, and training.
- Hiring for a peak that will end in two months, then paying for a full-time benefits package.
- Counting paid hours as productive hours.
- Hiring a tech before confirming the van, tools, and parts stock to support them.
- Promising benefits in a job posting that the business cannot keep.
- Skipping the written coverage plan, so off-day emergencies go to whoever answers the phone.
Writing the job posting
State the hours as a clear range, and say whether the role is part-time or full-time in the title. List the days and any on-call expectations. Name the pay range and say what it includes. Describe only the benefits you actually offer, and avoid vague phrases like "benefits available" if you have not costed them.
Include the tools and vehicle the person will use. A clear posting filters out people who cannot meet your schedule before you spend time interviewing them, which saves you hours on both sides.
A simple method before you post the job
Work through these steps in order, and keep your results. Comparing your estimate with what actually happens over the next quarter is the best way to improve the next hiring decision.
- Write the weekly labor gap in hours, by day, using the table from earlier.
- Choose one or two roles that could fill the gap. Do not compare more than two options at once.
- Get the real hourly wage for each role in your area. Use your own past job postings and what you have paid similar people. Do not guess.
- Add the employer costs for each option: payroll taxes, the benefits you will offer, insurance, and any retirement contributions. Get the actual rates from your payroll provider or accountant.
- Add one-time costs: recruiting, training time, vehicle, tools, phone, and uniforms.
- Divide the total weekly cost by billable hours, not paid hours. Estimate billable hours from your past job records. If you do not track them, start tracking now.
- Compare the two billable-hour costs. Then ask which option gives you the coverage you need.
A lower cost for each billable hour does not automatically make an option the right choice. Coverage, reliability, and retention are part of the answer, and the method only tells you the cost side.
Questions to ask yourself
- Which hours did I turn away last month, and which days were they?
- If I hire part-time, who covers the other days?
- If I hire full-time, can I keep the work steady enough to justify 40 hours?
- Will the person need a truck, and do I have one available?
- How long will training take, and who does it?
- Which benefits am I promising, and can I afford to keep promising them?
Final thought
Choosing between 20 hours and 40 hours is not about which hire is cheaper on paper. It is about which hire closes your real gap without creating a new one. Start with the hours you need. Cost each option the full way, including benefits, payroll, training, and equipment. Then choose the one that fits your work, and review the decision after a quarter or two so you can change course if the work changes.
Today, list the hours you turned away last month and the days they fell on. Do this before you post the job or talk to applicants.
Frequently asked questions
Is a part-time tech always cheaper?
No. Once benefits are added, each full-time hour costs more, so compare the cost of each billable hour rather than the hourly wage.
Which option suits a seasonal peak?
Part-time usually suits a seasonal peak, because it can cover a short-term rush without a permanent commitment to 40 hours a week.