Straight into the service manual page
WrenchQuarry
More

Parts order discounts and returns: 3 amounts to record

WrenchQuarry Editorial Team · Published · 12 min read · How these guides are written

Record three amounts when a parts order has a discount or a return: the discounted price, returned parts, and allowances on parts you keep. A supplier applies a discount you negotiated, a box arrives with a cracked housing, a dispatcher sends back the wrong capacitor, and a technician keeps a few fittings that turned out close enough. Each of those events changes what you owe. If your records do not follow each change, the supplier statement and your own books drift apart. By the end of the month, someone is staring at two numbers that should match and cannot tell why they don't.

This post covers three amounts to record once a discount and a return are in play:

  1. The discounted purchase price, which is what the order is worth before anything comes back.
  2. The returned parts, which reduce what you owe for the units you send back.
  3. The allowance on parts you keep, which is a price reduction for stock that works but is not what you ordered.

The worked examples come from the OpenStax principles of accounting textbook, which uses a candle company as its case study. A candle company is not a field-service firm, but the arithmetic is the same whether the shipment holds fittings, filters, or breakers. Read the examples as a model for the logic. They are not a ruling on how your supplier or your accountant has to handle your invoices.

1. Record the discounted price, not the list price

Start with the price you agreed to pay. The list price in a catalog, or the number on a quote from last spring, may not be what the order is worth today. In the textbook case, a 15% trade discount applies to a $4,000 order, and the arithmetic is laid out plainly: "The purchase price would be $4,000 less the 15% discount of $600, or $3,400." (OpenStax)

The same section makes a point that matters for anyone who pays suppliers on terms: "Since the trade discount is based on when the order was placed and not on any potential payment discounts, the initial journal entry to record the purchase would reflect the discounted amount of $3,400." (OpenStax)

That sentence packs in two ideas. The first is that the discount that belongs in the purchase amount depends on the order itself: when it was placed and what was agreed at that time. The second is that a payment discount, the reward for paying early, is a separate thing. It is not the price you record when the parts arrive. Keep the two apart in your records. A cash discount for paying early should not get mixed into the price of the parts, and a trade discount agreed at ordering should not disappear because the bill was paid late.

For a field-service shop, the practical check is short. Compare the price line on the supplier invoice to the purchase order or quote you approved. If the discount you negotiated is missing, raise it before you pay. If the invoice shows the discount but the total is not what you expected, find out why before the bill is posted. Keep the purchase order number on the invoice in your system so the comparison is easy to repeat next time. Store the quote, the purchase order, and the invoice together for each order. When a dispute starts weeks later, the person handling it should be able to open one folder and see the whole chain without phoning around the office.

A small habit helps here. When a dispatcher places an order by phone or email, write the agreed discount on the purchase order itself, not only in a note or in someone's memory. A discount that exists only in a conversation is hard to prove when the invoice arrives at a higher number. The purchase order is the document you will point to, so it should say everything that was agreed: the parts, the quantities, the unit prices, and the discount.

Watch for discounts that are applied at the line level and discounts applied to the whole order. They can look the same on a statement and may be handled differently when parts come back. If one part on a six-line order is returned, you want to know which discount applied to that line so the credit comes off the right amount. Ask the supplier how the discount is shown on their invoice before the first large order, not after the first dispute.

2. Record returned parts at what you paid

When you send parts back, the amount you record is the amount you are getting back for those parts. Not the retail price, and not the price you would charge a customer for them on a future job. The textbook sets up the case this way: a shipment arrives that had "150 candles that cost $150," and then the buyer finds that "100 of the candles are badly damaged and must be returned." (OpenStax)

Whether the bill was already paid changes how a return is treated, so have your bookkeeper confirm the treatment for each order.

The textbook resolves the damaged units cleanly: "The candle company returned the 100 defective candles for a full refund..." (OpenStax) Your returns will rarely be that tidy. A supplier may send a credit memo instead of cash, may ask you to ship the parts back at your expense, or may take a while to process the return. None of that changes the record you keep. Each returned unit should still have a clear line showing what it was, how many went back, and what you expect to get for them.

Partial deliveries add another wrinkle. Sometimes a return goes out while the rest of the order is still on its way, or while a replacement is being shipped. Record what came back separately from what is still open. That way the open balance on the purchase order is not reduced by a return the supplier has not yet confirmed, and the replacement arriving later does not get mistaken for a second delivery of the same parts.

Write a return record for every unit that goes back. Include the part number, the quantity, the original purchase order or invoice reference, the date it left, and the reason, such as damaged in transit or wrong part sent. Do not let a return sit as a loose note on a truck or on a parts shelf. A returned unit that is still on your books as stock is a unit you may think you have and do not.

Keep returned parts off the job. In one field-service software product, Microsoft's Dynamics 365 Field Service, inventory is pulled from the warehouse when the technician marks a work order product line as Used. The product documentation states: "For inventory-type products, the system deducts the used quantity from the specified warehouse earlier, when the technician sets a work order product's Line Status to Used." It also states: "Only items with a Line Status of Used appear on the invoice." (Microsoft) That is one vendor's design, not a rule your books have to follow. The logic still carries over. A part a technician pulled and then sent back should never be marked used. If it were, it would be charged to the customer and removed from your stock for a job that did not use it.

Set up a simple rule in your shop: the return is recorded on the day the parts leave, and the job record is updated to match. If a technician removes a part from a job, the job line changes. If the part goes back to the supplier, both the job and the inventory need to show it. Otherwise the customer invoice, your stock count, and the supplier credit will each tell a slightly different story. For how job statuses change along the way, see work order statuses before dispatch.

3. Record the allowance on parts you keep

Sometimes parts arrive wrong but are still usable. The part works, but it is a different style, a different rating, or a different finish than the one you ordered. You could send it back and wait for a replacement, or you could keep it and ask for a price reduction. The textbook calls the second option an allowance.

In the candle example, 50 candles were "marketable, but are not the right style." The buyer did not return them. Instead, the company "requested and received an allowance of $20 for the 50 improper candles they kept." (OpenStax)

Three things stand out in that sentence. The buyer asked for the allowance. The buyer received it. And the allowance applies to the units kept, not to the whole shipment. For your shop, that means an allowance is a negotiation, not an automatic credit. The supplier decides whether to agree, and you should not assume it will show up on the next statement just because the part was not what you wanted. Ask for it in writing, name the parts and the quantity, and record the amount when the supplier confirms it.

Record the allowance as a reduction in what you owe for those specific units. Do not fold it into the discount line. A trade discount was agreed when the order was placed. An allowance is agreed after the parts arrived because of a problem with them. Keeping the two separate tells you which problems the supplier has agreed to absorb and which ones came from your own ordering mistakes. That distinction is useful when you review supplier performance at the end of the quarter.

Some practical notes on allowances. Write down what was wrong: the wrong style, the wrong rating, a scratch that does not affect function. A short description now saves an argument later if the supplier questions the credit. Check whether the kept parts are going onto a job or sitting on the shelf. Parts you keep for stock may need to be tracked at the adjusted cost, while parts used on a job flow through to the customer invoice. How your system handles that adjusted cost is worth confirming with your accountant before the first allowance comes through, not after.

Be careful about one trap. If a technician installs a part that was supposed to be returned, the allowance question disappears and a different problem takes its place. The part is now on a job, the supplier may refuse a return, and the customer is paying for something that was supposed to go back. Decide before the parts leave the truck whether each wrong item is coming back or staying. Once it is installed, the choice is gone.

Who handles each amount

The three amounts usually pass through different hands, and that is where errors creep in. The person who orders parts knows the discount that was agreed. The person who receives the delivery knows what arrived damaged or wrong. The person who pays the bill sees only the total on the supplier statement. If each of those people keeps their part to themselves, nobody sees the full picture until the statement goes out of balance.

A simple split works for most small shops. The dispatcher or purchasing person owns the purchase price, which means the approved order, the discount, and the invoice check. The person receiving parts owns the return record: what came back, in what condition, and why, written down the same day. The owner or office lead owns the allowance decision and the final reconciliation. Nobody has to be an accountant to do this. They only have to write things down where the next person will look.

Handoffs are where things get lost. A technician who spots a wrong part at a job site should tell dispatch that day, not wait until the truck is back at the yard. Dispatch should pass it to whoever handles returns the same day, with the part number, the quantity, and a photo if one helps show the problem. A verbal "that bracket's the wrong one" is easy to forget by the time the invoice arrives. For the dispatch side of this handoff, see Field Service Work Order Checklist for Dispatch Handoffs.

If you use a job management or field-service system, check whether returns can be recorded against the original purchase order. If they can, use that link, because it lets the system show the open return next to the bill. If they cannot, a shared spreadsheet with the same columns works, as long as one named person is responsible for keeping it current. A spreadsheet that three people edit and nobody owns is the fastest way to end up with three versions of the truth.

Putting the three amounts together

Think of the three amounts as one reconciliation. Start with the discounted purchase price. Subtract the returned units at what you paid for them. Subtract the allowance for the units you kept. What is left should match the amount on the supplier statement, less any payment discount you are entitled to when you pay. If the numbers match, the order is closed. If they don't, the difference points at one of the three amounts.

Here is the order in which to check it:

  1. Confirm the purchase price on the invoice matches the price you approved, including the discount.
  2. Match each return to a return record with part number, quantity, and reason.
  3. Confirm the supplier has issued a credit for the returned units, or a refund if the bill was already paid.
  4. Confirm any allowance is in writing and matches the units you kept.
  5. Check that returned parts are not marked as used on any job.

Run that check before you approve payment, not after. Paying first and reconciling later makes every mismatch harder to fix, because the money has already left and the supplier has less reason to talk to you. A dispatcher can do most of the checking if the purchase order, the return record, and the job lines are all in the same system. An owner should look at the total once a month to catch patterns, such as the same supplier sending the same wrong part every quarter.

If the numbers do not reconcile, do not force them to fit. Find the line that is off. Most of the time the cause is one of three things: a discount missing from the invoice, a return that was never recorded, or an allowance that was agreed by phone and never written down. Each one has a simple fix, but only if you find it while the paperwork is still fresh. Call the supplier with the purchase order number, the return reference, and the specific line in question. Specific questions get faster answers than general complaints.

Finally, treat the three amounts as a habit, not a one-time cleanup. When you set up a new supplier, ask how discounts appear on their invoices, how returns are processed, and how allowances are requested. Write the answers down. Next time an order goes sideways, you will already know which document to pull and which person to call.

That is the whole job: three amounts, recorded in order, checked against the supplier's paperwork before you pay. It saves a great deal more when a supplier disputes a balance weeks later and you can show exactly what was agreed, what came back, and what you kept.

Related guides: Bulk order sales tax: 3 checks before billing · Flat-rate pricebook price: 3 parts to build in.

Sources

More field guides