Straight into the service manual page
WrenchQuarry
More

Prorate a van's first-year depreciation: 4 steps

WrenchQuarry Editorial Team · Published · 11 min read · How these guides are written

To prorate a van's first-year depreciation, multiply the full-year charge by the number of months the van was in service, then divide by twelve. A van bought partway through the year produces a smaller first-year figure than a full year's charge, because it only worked for part of that year.

Key takeaways

  • Confirm the cost and both dates, and write down which date you used.
  • Subtract salvage value from cost, then divide by useful life to get the full-year charge.
  • Multiply that charge by the months in service, then divide by twelve.
  • Carry the remaining balance forward on the asset record each year.

This guide walks through the four steps behind that number. Owners and office leads can use it to check the figure their bookkeeper or tax preparer produces. The arithmetic is short, and someone who understands it can spot a bad input before it reaches the return.

The first-year figure does more than fill a line on the return. It sets the expense that appears in the books for the year, and it decides how much of the van's cost is left to recover in later years. An error in year one moves every figure after it, so it pays to get it right the first time.

The numbers in this guide come from a textbook example that uses straight-line depreciation. Use them to learn the method, not as the rules for your own van. Check which schedule your return requires, since some schedules work differently.

The four steps are: confirm the cost and the dates, work out the full-year amount, prorate it for the months in service, and carry the balance forward.

1. Confirm the cost and the dates

Start with what the van cost, as your purchase records show it. Put everything in one folder for the asset so the numbers can be traced later.

If the van was bought used, check whether the seller's paperwork lists the vehicle and any fitted equipment as separate amounts. Those amounts may need separate lines on your asset record.

The starting figure matters because it changes over time. The IRS explains that "Certain events that occur during the period of your ownership may increase or decrease your basis, resulting in an "adjusted basis."" IRS, Topic no. 703 A wrong starting cost carries into every later step, so check it against the paperwork before you calculate anything.

Next, write down two dates: the day you paid for the van, and the day it was first put to work in the business. They are often different.

Ask your preparer which date applies, and write the answer on the asset record. That way the next person does not have to guess.

A short log helps with this. Note the delivery date, the date of the first business trip, and the date the van joined the fleet list. If those dates disagree, write down which one you used and why. A one-line reason in the file is far more useful later than a bare number.

Also note how the van is used. If it makes personal trips as well as business ones, say so on the record. If an add-on arrived at a different time, record its date separately. You are not settling the tax treatment yourself here. You are giving your preparer the facts they need to apply the right rule.

A note such as "bought early in the spring, in service in late spring, used for field visits and some personal driving" saves a lot of back-and-forth at tax time.

Each line records the description, cost, purchase date, in-service date, useful life, and salvage value. A register kept current makes the first-year figure quick to produce, and it gives next year's calculation a clear starting point. For common errors at this stage, see Service van depreciation: 2 common mistakes to avoid.

2. Work out the full-year amount

Calculate the full-year figure first, because the first-year figure is built from it. The textbook example sets up its case this way: "For example, a company purchases an asset with a total cost of $58,000, a five-year useful life, and a salvage value of $10,000." OpenStax, Principles of Accounting, Volume 1

For the straight-line method, those three inputs are all you need: cost, useful life, and salvage value. For more on setting those inputs, see Straight-line depreciation: 3 figures to set on equipment.

Salvage value is the amount the asset should be worth at the end of its use. Subtract it from cost to get the amount to spread over the life. In the example, $58,000 less $10,000 leaves $48,000, which is the depreciable amount. The full schedule has to add up to that figure.

Next, divide the depreciable amount by the useful life. Five years gives $48,000 divided by five, or $9,600 for a full year. That is the charge for one whole year of use before any proration, and it is the number you will reduce in step three.

Straight-line depreciation is easy to follow for a van because the cost is spread evenly across the years. The full-year figure does not change with how many miles the van covered that year. That makes the method a good way to learn the steps, even if your own return follows a different schedule.

Do not copy the five years or the $10,000 into your return. Use the example to check that your arithmetic is right, then swap in the figures that apply to your asset.

Salvage value is an estimate, and an estimate needs a reason behind it. Write down where the figure came from: a dealer's trade-in quote, a published guide, or your own judgment. A figure you can explain is much easier for a preparer to review than one that appears on the record with no source.

Before you move on, check the arithmetic twice. Subtract salvage value from cost, then divide by the useful life. If someone else can look at the result, have them do it. Errors at this step carry into every later step, so a few minutes here are well spent.

3. Prorate for the months in service

Proration means taking only the part of the full-year figure that matches the time the van was in use. In the textbook example, the asset was in service for nine months of the year. The first-year charge is the full-year figure multiplied by nine, then divided by twelve.

ItemExample figure
Full-year charge$9,600
Months in service9 of 12
Fraction of the year9/12
First-year charge$7,200

Apply the same formula to your own van. If it went into service late in the year, count the months from the in-service month to the end of the tax year. Multiply the full-year figure by that count, then divide by twelve. Counting by hand works well for a rough check.

Counting months gets awkward when the in-service date falls in the middle of a month. For a cleaner figure, many office leads use a spreadsheet. Microsoft describes its YEARFRAC function this way: "Calculates the fraction of the year represented by the number of whole days between two dates (the start_date and the end_date)." Microsoft Learn The same page says the function suits this kind of job: "Use the YearFrac worksheet function to identify the proportion of a whole year's benefits or obligations to assign to a specific term."

A mid-month date produces a fraction that is not a whole number of months. A plain month count would have to round part of a month one way or the other. The spreadsheet makes that choice for you, as long as you choose the basis on purpose.

Enter both dates with the DATE function, not as typed text. Microsoft's own example reads "use DATE(2008,5,23) for the 23rd day of May, 2008," and the same approach works for your in-service date. The page says dates "should be entered by using the DATE function, or as results of other formulas or functions," which is the safer habit. Use the year-end date your return uses as the second date.

The basis argument sets the day-count convention. Microsoft describes it as "the type of day count basis to use," and it warns that "If basis < 0 or if basis > 4, YearFrac returns the #NUM! error value." Pick one basis, use it for every asset on the schedule, and write it down. Then compare the result with a plain month count. If the two differ by more than a small amount, check the basis and the dates before you post anything.

Once you have the fraction, multiply the full-year figure by it. In the example, $9,600 times nine twelfths is $7,200. Your own result should land close to the same kind of answer, with less room for counting error when the in-service date falls mid-month. Keep the fraction and the full-year figure on the asset record, so anyone reviewing the number can see both inputs.

Illustrative example: three months in service

A van with a full-year charge of $9,600 is in service for three months of the tax year. Multiply $9,600 by 3, then divide by 12. The first-year charge is $2,400, the same formula as step three applied to a shorter period of use.

The entry matters for the year-end books too. A full-year charge posted for a van that was in service only part of the year overstates that year's expense. Check the fraction before the entry is posted, and correct it promptly if a review turns up a different date.

4. Track the balance for later years

After the first year, the rest of the schedule follows a pattern. The textbook example lays out the full run: "The company will depreciate the asset $9,600 for the next four years, but only $2,400 in the sixth year so that the total depreciation of the asset over its useful life is the depreciable amount of $48,000 ($7,200 + 9,600 + 9,600 + 9,600 + 9,600 + 2,400)." OpenStax

Read the pattern closely. The first year is partial, the middle years take the full annual figure, and the last year takes whatever remains to reach the depreciable amount. Your own schedule should end on the same kind of total. If your figures do not add up to the depreciable amount, find the error before the return is prepared.

YearCharge
First (partial year)$7,200
Second to fifth$9,600 each
Sixth (final partial year)$2,400
Total$48,000

Adding up a schedule like this takes a minute, and it is a quick way to catch arithmetic slips before they reach the books.

Next year, the register line does most of the work. Pull the adjusted balance from the record, confirm that the useful life and salvage value have not changed, and carry the charge forward. The only new input is the calendar, so the figure is quick to produce once the first year is set.

Keep a running balance on the asset record. The IRS notes that depreciation reduces basis: "Increase your basis by items such as the cost of improvements that add to the value of the property, and decrease it by items such as allowable depreciation and insurance reimbursements for casualty and theft losses." IRS, Topic no. 703 Each year, subtract the charge from the adjusted basis and write the new figure down with the date. The amount still to be recovered is then visible at a glance.

If the van leaves service before its schedule ends, the balance you have been carrying shows how much of the cost is still unrecovered. Hand that figure to your preparer along with the dates and the method you used. It is the information they need to close the asset out correctly.

Once the first-year figure is set, the work is mostly bookkeeping. Calculate the full-year amount once, prorate it once for the year the van went into service, and carry the balance forward each year. If the in-service date changes, redo the fraction and the schedule together, because the later years depend on the first.

Then have your tax preparer confirm the final figure. This example is only a way to check that your numbers hang together. Keep the asset record with the return file, so a reviewer can follow each step without having to ask where a number came from.

Next step: Today, open your asset record and check that the cost, both dates and the in-service month match your purchase paperwork.

Related guides: Injury record copies: 2 rules, free first, fee after · Maintenance plan billing: 3 settings to check first · NC competitive bidding: 9 exemptions to check first.

Frequently asked questions

Does a van bought mid-year get a full year's charge?

No. Its first-year figure is prorated by the months it was in service, so it comes out smaller than a full year's charge.

Can a spreadsheet handle the fraction?

Yes. A date function such as YEARFRAC handles mid-month dates, as long as you choose the day-count basis on purpose and write it down.

Sources

More field guides