- The two recipients are the owner-occupier and, under conditions, the prime contractor.
- The owner notice applies when your company has no direct agreement with the homeowner or the homeowner's agent.
- The prime notice depends on the prime's standing under the three statutes and on whether your company holds its own contract with the prime.
- The notice must track the statutory layout and use ten-point type.
- Personal delivery to the homeowner needs written proof: a signed acknowledgment, another signed acknowledgment page, or an affidavit of service.
If a subcontractor on an owner-occupied home in Washington goes unpaid, the two parties to notify are the homeowner and, when the conditions in RCW 60.04.031 are met, the prime contractor. A subcontractor with no direct agreement with the homeowner must give that homeowner notice of the right to claim a lien. The prime contractor receives notice only in a narrower set of cases, which the sections below explain.
Net takeaways
Two parties to notify before the lien clock runs
When a subcontractor on an owner-occupied home in Washington goes unpaid, the notice work runs to two recipients. The first is the owner-occupier, the homeowner who lives in the house being repaired. The second is the prime contractor, the firm that holds the contract for the job and brought your company in. Which recipients apply depends on how your contract is structured and on the prime's standing under the statute.
The prime step is conditional. RCW 60.04.031 says that if the prime contractor "is in compliance with the requirements of RCW 19.27.095, 60.04.230, and 60.04.261," the notice "shall also be given to the prime contractor as described in this subsection unless the potential lien claimant has contracted directly with the prime contractor." Two facts control that second notice: whether the prime meets those three statutory requirements, and whether your company holds its own contract with the prime. If the prime is out of compliance, the text does not call for the prime notice.
The owner-occupier is the recipient that stays in view in almost every structure. Firms hired by a general contractor rather than by the homeowner are the ones most likely to need to reach the owner directly, so the owner step is the one small subs most often have to plan around.
For dispatchers, the practical step is to record the contract chain at the start of each job. Note who signed with the homeowner, who signed with your company, and what you know about the prime's compliance. When a payment problem appears, the notice question has ready answers. A record written at intake is far easier to use than one rebuilt after a dispute has started.
When your contract runs straight to the prime
Subcontractors who contract directly with the prime form their own category in the statute. RCW 60.04.031 describes them as "Subcontractors who contract for the improvement of real property directly with the prime contractor, except as provided in subsection (3)(b) of this section." The category is defined by the contract: work to improve real property, signed directly with the prime. A home repair contract is a contract for work on real property, so a firm hired straight by the prime fits this description when the work is on the homeowner's house.
The category matters because of the exception built into the prime notice rule. That rule excuses the prime notice where the claimant has signed a direct agreement with the prime. If your company signed with the prime, that exception takes the prime notice off your list. Your obligations then rest on the owner step, since your company has no direct agreement with the homeowner. A direct prime contract removes one recipient and leaves the other in place.
The exception is not absolute. It is qualified by the cross-reference quoted above, so the rule for direct-prime subcontractors depends on a provision within the same statute. Treat that cross-reference as part of the rule, not as a footnote.
Practically, the signed contract with the prime belongs in the job file. The exclusion depends on that document, and a dispatcher who can produce it quickly avoids guessing. Keep the subcontract paired with the job record so the two travel together whenever the file is reviewed.
Comparing your notice options side by side
| Measure | Notice to the owner-occupier | Notice to the prime contractor |
|---|---|---|
| Trigger | No direct agreement with the homeowner or the homeowner's common law agent | The prime's standing meets the statutory compliance condition |
| Exception | A direct agreement with the homeowner or the homeowner's common law agent | Your company holds a direct prime agreement |
| Form | Statutory layout, ten-point type | Statutory layout, ten-point type |
Read the table row by row. The owner route applies whenever your company lacks a direct agreement with the homeowner or the homeowner's agent, and its trigger says nothing about the prime's compliance. The prime route is narrower: it needs a compliant prime and no direct prime contract on your side. A subcontractor working under a compliant prime, without a direct owner agreement, can fall inside both routes at once, because the two triggers test different relationships.
Both routes share the same layout and type rule, so one approved form can be adapted for each recipient. The next section explains what that form requires.
The statutory form the notice must follow
The statute does not leave the notice's appearance to the sender. RCW 60.04.031 states that the notice of right to claim a lien "shall include but not be limited to the following information and shall substantially be in the following form, using lower-case and upper-case ten-point type where appropriate." Three features of that sentence shape how a dispatcher drafts the notice.
| Element | Statutory requirement |
|---|---|
| Content | At least the information the statute lists, since the list is not limited to those items |
| Layout | Substantially the form the statute sets out |
| Type | Ten-point type, using lower-case and upper-case where appropriate |
The phrase "not be limited to" makes the listed items a floor. A notice that leaves out a listed item falls short of the statute, and the words invite the sender to add accurate job details rather than cutting the notice to the minimum. The word "substantially" means the layout has to track the statutory form closely. It does not give the sender room to design a new layout that happens to carry the same words.
The type rule is specific. The statute names ten-point type and asks for lower-case and upper-case letters where appropriate, so a notice printed in a larger or all-capital style departs from the text. Keep one approved form on file in ten-point type, and fill in only the job-specific details. A form reviewed once is safer than one retyped under deadline pressure.
Delivering the notice in person
Personal delivery is one method the statute describes. The other half is the paper that proves it happened.
| Proof item | What it shows |
|---|---|
| Signed record | A signed record that the homeowner received the notice |
| Acknowledgment | A signed acknowledgment of delivery, listed alongside the signed record |
| Affidavit of service | A sworn statement that service was made |
A dispatcher who sends a crew member to deliver the notice should bring a signed record page or an acknowledgment page, and the crew member should return it signed. If no signature can be obtained at the door, the affidavit of service is the other evidence the statute names.
The statute asks for evidence of delivery, not just a delivery attempt. Record the date, the method, and the proof document in the job file for every notice. That record turns a delivered notice into one you can show was delivered.
Notice to the owner-occupier without a direct contract
RCW 60.04.031 frames the owner step in one sentence: subcontractors "who do not contract directly with the owner-occupier or their common law agent shall give notice of the right to claim a lien to the owner-occupier." The sentence adds a detail that changes the analysis. A contract with the owner's common law agent counts the same as a contract with the homeowner, so signing with that agent takes your company outside this rule.
For a dispatcher the question is factual: who signed on the owner's behalf, and did that person act as the owner's agent? If so, your company dealt with the homeowner through an agent, and the owner notice is not triggered. Record that answer in the file alongside the signed contract.
The owner step also differs from the prime step in what it depends on. This subsection does not condition the owner notice on the prime's compliance with the statutes named earlier. A subcontractor hired through a general contractor who falls outside those conditions still falls under the owner test as quoted. The question that decides the owner notice is your contract relationship with the homeowner or the agent, not the general contractor's standing.
Because the homeowner is the recipient, the proof rule from the previous section applies here. This is where a dispatcher plans the signed record, acknowledgment, or affidavit of service.
Keeping each job's notices and proof separate
Dispatchers who handle many small repair jobs can lose track of which notice belongs to which house. The statute works one job at a time. Each notice concerns a particular homeowner and, if it applies, a particular prime contractor. A notice drafted from another job's file, or a proof page filed under the wrong address, weakens the record even when the notice itself is correct.
Build a separate file for each job with four items: the signed contract with the homeowner or their agent, if one exists; the signed subcontract with the prime, if one exists; the notice as sent; and the proof of delivery. Once a notice goes out, do not edit the original. Log any later change as a dated note. The notice rules in RCW 60.04.031 turn on the contract relationship for each job, so a file that shows that relationship clearly lets anyone reviewing it see which recipient applied and why.
Separate files also guard against a common mistake: sending an owner notice to a homeowner whose house is not the job site, or sending a prime notice to a general contractor who was not the prime on that job. Matching each notice to its job before it leaves the office takes a few minutes and prevents a much longer correction later.
Where enforcement details belong
The statutory language discussed here tells a sender who must receive notice, what the notice must contain, and how personal delivery must be proven. It does not describe what happens if a notice is late, missing, or defective, and this post does not supply those consequences. Anyone who needs to know how enforcement works should read the complete statute, not a summary.
That gap matters for planning. A dispatcher may be tempted to treat the notice as a formality, or to assume a missed notice has a particular result. The language covered here says nothing about the result of a missed notice, so neither assumption is safe. Treat each element the statute does specify as mandatory: the listed content, the statutory layout, ten-point type, and proof of personal delivery.
Other states write these rules differently, and a rule from one state should not be assumed to apply in another. North Carolina's text, for example, makes one step depend on "satisfaction of those requirements set forth in G.S." and points to a separate section of that state's code, the same kind of cross-reference Washington uses. Source: North Carolina General Assembly.
Virginia takes a firmer line on one practice that dispatchers sometimes consider: holding back money on one job to cover a dispute on another. Virginia law states that "Any contract or subcontract provision that allows a contracting party to withhold funds due under one contract or subcontract for alleged claims or damages due on another contract or subcontract is void as against public policy." Source: Virginia Law. The Washington text quoted in this post says nothing about cross-contract withholding, so do not assume Virginia's rule applies in Washington.
For questions about deadlines, remedies, or how a defective notice would be treated, the right sources are the full statute and a lawyer who handles construction liens in Washington.
Which one should you pick?
You do not choose a notice from a menu. The statute determines which recipients apply, and your task is to read your own contract chain accurately. The contract you hold decides the route. Three common contract chains are below.
| Your contract | Owner-occupier notice | Prime contractor notice |
|---|---|---|
| Signed with the prime, nothing with the homeowner or their agent | Applies | Does not apply, because of the direct-prime exception |
| Signed with the homeowner or their agent, not the prime | Does not apply | Applies only if the prime's standing is compliant |
| No direct contract with either | Applies | Applies only if the prime's standing is compliant |
The direct-prime exception removes the prime notice, but the owner step still applies, so the owner notice is the one to prepare first. The exception is qualified, though. The cross-reference quoted earlier shapes it, and this post does not reproduce that subsection. Read the full text before relying on the exception in a dispute.
For the second and third rows, the prime's standing decides whether the prime notice applies at all. If you cannot confirm that standing from your file, the question cannot be settled from the statute language in this post alone.
Notice rules at a glance
| Rule | What the statute says | Check before sending |
|---|---|---|
| Prime notice trigger | The prime's standing meets the statutory compliance condition | Written confirmation of the prime's standing is in the file |
| Direct-prime exception | Prime notice is excused where your company holds a direct prime agreement | A signed subcontract with the prime is on file |
| Owner notice trigger | No direct agreement with the homeowner or the homeowner's agent | The file records who signed on the owner's behalf |
| Form | Includes at least the listed information, tracks the statutory layout, uses ten-point type where appropriate | The approved form matches the layout and the type is ten-point |
| Delivery proof | Personal delivery, backed by a signed record, acknowledgment, or affidavit of service | Signed proof or a filed affidavit is in the job file |
Use this table as a pre-send checklist. Each row points back to a rule described earlier, and each check is a step a dispatcher can complete before the notice leaves the office.
Mapping the rules to your dispatch workflow
A workable routine has six steps, and each one answers a question the statute raises.
- At intake, record the contract chain. Note who signed with the homeowner or their agent, and who signed with the prime, if anyone.
- Confirm the prime's standing. If a prime notice might apply, document that the prime meets the three listed statutes before deciding.
- Select the form for each recipient. Owner and prime notices follow the same layout and type rules, so one approved, ten-point form can be adapted for each.
- Deliver personally. Where you deliver personally, the statute requires personal delivery to the owner or reputed owner, backed by a signed record, another signed acknowledgment, or an affidavit of service.
- Log the proof. Record the date, the method, and the proof document in the job file. The proof is what shows the notice was delivered.
- Review the file when a payment problem appears. Check the recipients against the contract chain and the table above before deciding which notices apply.
The routine works best when dispatch owns steps one and five, since those depend on information that exists at intake and at delivery. Office staff can then handle steps two and three, which depend on the prime's standing and the approved form.
Related guides: Lien notice rules: 3 states and a job checklist · Arizona 20-day preliminary notice: 2 ten-day owner duties · Florida bid-date change notice: 3 fields to include.
Reader questions
Do I always have to notify the prime contractor? No. The prime notice applies only when the prime meets the statutory compliance condition and your company has no direct prime agreement.
If I signed with the homeowner's agent, do I still owe the owner notice? The owner sentence applies when you lack a direct agreement with the homeowner or their common law agent. A contract with that agent counts the same as one with the homeowner, so the owner notice is not triggered in that case.
Does the notice have to look exactly like the statutory form? It must track the statutory layout closely and include at least the listed information. The statute says the list is not limited to those items, so accurate job details can be added. The type should be ten-point, using lower-case and upper-case letters where appropriate.
Is handing the notice to the homeowner enough? No. Personal delivery must be backed by evidence: a signed record or other acknowledgment, or an affidavit of service.
Can I use one form for both recipients? Yes, because both notices follow the same layout and type rules. Fill in the recipient and job details separately for each notice.
Does a non-compliant prime remove the owner notice? No. The compliance condition appears in the prime notice rule, not in the owner sentence. The owner notice depends on your relationship with the homeowner or their agent, not on the prime's standing.
Does this post cover deadlines or penalties? No. This post covers who receives notice, what the notice contains, how it is formed, and how delivery is proven. For deadlines, remedies, or the effect of a defective notice, read the full statute and consult a lawyer.